New 96pcs Bundle Bevel Grid Type Acoustic Panel Sound Absorption Studio Soundproof Foam 50x50x5

• Brand New Bevel Grid Acoustic Foam
• Made by Imported High Quality Foam
• Sound-Absorbing Foam
• High density acoustic cell structure for maximum noise absorption
• Helps to flutter echoes and reduce excess reflections and reverberation
• Improves vocal clarity and acoustics of your room
• Highly fire retardant
• Ideal for use in recording studios, home theatres and karaoke room
• 7 Colors Available
  • BLACK, BLUE, COFFEE, GRAY, RED, YELLOW, and BABY BLUE (see example colors below)
• Size & Dimenson: 50cm x 50cm x 5cm (19.6 x 19.6 x 1.9 in)
• Each order contain: 96pcs Acoustic Foam, FREE 4pcs Adhesive Tapes, and an Installation Guide.
• NOTE: We may split your order into multiple shipments for postage. And due to shipping requirement, we compressed (vacuum sealed) the acoustic foam fpr easy shipping. Please kindly give up until 24 to 48 hours for the foam to restore its normal size.

This New Acoustic Foam is made with High Quality Imported Foam. Sound vibration are broadcast through trhe air, causing issues with noise entering and exiting your house studio. This sound absorbing Polyurethane foam panel is design to reduce echo within an environment. The Wedge Studio Foam enhances the sounf quality and aesthetics of any recording or listening environment. Why hire a Professional if you can construct a soundproof room in your house yourself!.

For the very best quality, most complete soundproofing you just need this New Acoustic Foam! It comes with an adhesive which makes it convenient and easy to place. Buy these New Acoustic Foam now and have a perfect room to party!

Applications:

• Auditoriums
• Broadcast Studios
• Computer Rooms
• Equipment Enclosures
• Equipment Rooms
• Gymnasiums
•  Gun Ranges
• Home Recording Studios
• Home Theaters
• Industrial Facilities
• Professional Theaters
• Professional Recording Studios
• Warehousing Facilities

General Installation Tips:

    Soft Sound Wedge Studio Foam is typically surface mounted on the walls within a studio and will improve the overall acoustic performance of the space. It is important that you evenly distribute the panels throughout the room and not cluster in one area. The Wedge Studio Foam is a modular pattern - the seams don't always line up perfectly when butting the pieces end to end, this is explained further below.

     The Polyurethane Foam outlined is these instruction is not a Class A fire rated material and may not be acceptable for commercial environments.

Tools Required:

• Utility Knife
• Straight edge
• Tape measure
• Caulking gun
• Pencil or Chalk line

Cutting:

1. Mark the Wedge Studio Foam to the appropriate size using the tape measure and marker. Cut along the line using the utility knife. With the thicker foams, it may take several passes to completely cut the Anechoic Studio Foam.
2.  An alternate cutting is to compress the foam along the line marked in Step 1. With the material compressed, it will reduce the number of passes that must be made to completely cut the foam.

Installation Methods:

1.  Lay the Wedge Studion Foam out of your specific application - keep in mind that you want the foam evenly distributed throughout the room. Wedge foam is a modular design and the seams don't always line up with the pattern.
2.  Measure any areas that need to be field cut on the foam and make the appropriate cuts (xamples would be around beams, doorways, or if a short piece is needed).
3.  After all the pieces have been field cut, put the material back in the appropriate position on the wall or ceiling and lightly mark the bottom and sideof where each piece will be lightly with a pencil to ensure straight application.
4.  Glue each piece individually witj PL Polyutherane Construction Adhesive. Create a perimeter around the outside of the material staying 1 1/2" away from the edge. Create an X patter across the center of the material.
5.  Line the material up with the lines you marked in Step 3 and press firmly against the material compressing the foam. Repeat step for remaining pieces of foam.

Guaranteed:

• FREE Shipping
• FREE Returns Worlwide
• 100% Money Back
• Ships in 2-3 business days
• Tracking number included for all orders
• 1 to 2 weeks Delivery Time

FAQ:

1. Is this product sold with whatever I need to  mount/stick it on my walls? If not, what product should I buy to do that?

• No, but you can but the Adhesive tape HERE.

2. Can I spray paint them to make them a little more attractive?

• You can, but we wouldn't advise this. Not only they are extremely porous-- because clearly, its foam and it would change the condition to do what they were originally intended to do (to collect sound). We suggest you buy different colors of panels, we offer different colors for these kind of situations. You can check it HERE.

3. How do I arrange these around my room with studio monitors?

• There are couple of ways of doing it, one way is to arrange all of them together on your wall opposite of your monitors. Another way is to spread them out evenly around the room. For more ideas on, you can check on Youtube.

4. It really echoes when I am talking on the phone at normal volumes. Will this dampen my voice?

• Yes it will substantially. But it depends on the size of the room on how much it will absorb the sound.

5. Did the foams undergo a Sound Absorption Test?

• Yes. After manufacturing, the Foams will undergo Sound Absorption Test.